Banner Engineering D10DPFP D10 Fiber Optic Sensor, Rectangle Shape, Visible Red Sensing Beam, 0.05 ms Response Time, PNP Output
Fiber Optic Block Style Sensors
160737
MFG #: D10DPFP
BANNER®
301.39000
/ ea
- Catalog Number: D10DPFP
- Connection Type: Cable
- Enclosure Type: NEMA 1/IP50
- Environmental Conditions: 90% at 50 deg C Maximum Relative Humidity
- Gross Weight Per Pack: 1 lb
- Light Source: LED
- Mounting Type: DIN Rail
- Operating Temperature: -10 to 55 °C
- Series: D10
- Standards: CE Marked, UL Listed
- UPC 11: 66248862382
- UPC 12: 66248862382
- Voltage Rating: 12 to 24 VDC
- Stock Status: NONSTOCK
- Brand: BANNER®
- Manufacturer: Banner Engineering Corp.
- Output Type: PNP
- Response Time: 0.05 ms
- Sensing Beam: Red Laser
- Shape: Rectangular
- Features
| Easy-to-set automatic expert-style teach options including static, dynamic, and single point programming plus manual adjustment for fine tuning |
| 16-bit microcontroller and 12-bit Analog-to-Digital converter for high-performance, low contrast sensing |
| Easy-to-read 4-digit display for teach and signal strength readout, plus indicators for a continuous readout of operating status |
| Four-mode power and speed selection with automatic crosstalk avoidance circuitry |
| Selectable off-delay options |
| Gate input wire can be used to selectively inhibit sensor outputs from switching |
| Visible red (680 N-m sensing beam |
| 2 m cable connection |
| Sleek, ultra-slim 10 mm housing, mounts to a standard 35 mm DIN rail |