SW 3 WAY SGL GANG 20A 3/4"IN
Tumbler-Snap Switch Control Stations
225267
MFG #: EFSC175-F3W
Appleton™
269.90000
/ ea
- Actuator: Nylon 6.6 Handle
- Application: For Use In Classified Areas Where Ignitable Vapors, Gases Or Highly Combustible Dusts Are Present
- ARRA Compliant: N
- Buy American Compliant: N
- Catalog Number: EFSC175-F3W
- Country of Origin: MX
- Currency: USD
- Dimensions: 6.13 in H x 3 in W x 4.53 in D
- Enclosure: NEMA 7CD, 9EFG
- EU RoHS Indicator: C
- Finish: Triple Coated
- Gross Weight Per Pack: 5.2100 lb
- Gross Weight per Pack Metric: 2.36
- Gross Weight UOM Metric: kg
- Height: 5.00 in
- Height [Metric]: 12.7000 cm
- Length: 8.00 in
- Length [Metric]: 20.3200 cm
- Material: Malleable Iron
- Mounting: Surface Mount With 3/4 IN Feed-Thru Hub
- Mounting Type: Surface
- Operator Type: Front
- Series: EFS
- Standard: UL 894, UL 1203, E10523, E81751 UL Listed, Class I, Division 1 And 2, Groups C, D, Class II, Division 1 And 2, Groups E, F, G And Class III
- Standards: UL 894UL 1203 File No. E10523/E81751NEC class I, Div 1 and 2, Groups C, D class II, Div 1 and 2, Groups E, F, G class III
- Sub Brand: UNILETS
- Type: 1-Gang Feed-Through Non-Sealed
- UNSPSC: 39121565
- UPC 11: 78138128415
- UPC 12: 781381284158
- Width: 6.00 in
- Width [Metric]: 15.2400 cm
- Stock Status: NONSTOCK
- Brand: Appleton™
- Manufacturer: Appleton
- Amperage Rating: 20 A
- NEMA Rating: NEMA 7CD/9EFG
- Voltage Rating: 120/277 VAC
- Applications
- Features
| For Use In Classified Areas Where Ignitable Vapors, Gases Or Highly Combustible Dusts Are Present |
| Enclosures have external mounting lugs for ease of mounting; Smooth, rounded integral bushing in each hub protects conductor insulation; Enclosures furnished with internal ground screw; Smooth ground mating surfaces assure flame-tight joint between cover and mounting enclosure; Stainless steel hex head cap screws for attaching cover to mounting enclosure; Choice of front-operating or side rocker arm handle each may be locked in ON or OFF position; Each handle has close-tolerance threaded stainless steel shaft to meet explosionproof requirements; Enclosures furnished with internal ground screw; For installation in: chemical plants, petrochemical plants, Refineries, other process industries; Designed to prevent arcing of enclosed switches in ignitable atmospheres during connect and disconnect operation of lighting and light power loads |
| Enclosures have external mounting lugs for ease of mounting |
| Smooth, rounded integral bushing in each hub protects conductor insulation |
| Enclosures furnished with internal ground screw |
| Smooth ground mating surfaces assure flame-tight joint between cover and mounting enclosure |
| Stainless steel hex head cap screws for attaching cover to mounting enclosure |
| Choice of front operating or side rocker arm handle-each may be locked in ON or OFF position |
| Each handle has close-tolerance threaded stainless steel shaft to meet explosion proof requirements |
| For use in classified areas where ignitable vapors, gases or highly combustible dusts are present |