Appleton® EDSC275-F3W FACTORY SEALED SWITCH UNILET
Tumbler-Snap Switch Control Stations
464350
MFG #: EDSC275F3W
Appleton™
773.89000
/ ea
- Actuator: Lever
- ARRA Compliant: N
- Buy American Compliant: N
- Catalog Number: EDSC275F3W
- Connection Type: Threaded
- Country of Origin: MX
- Currency: USD
- Dimensions: 6.38 in H x 6.19 in W x 4.69 in D
- EU RoHS Indicator: C
- Finish: Triple Coated
- Gross Weight Per Pack: 8.7500 lb
- Gross Weight per Pack Metric: 3.97
- Gross Weight UOM Metric: kg
- Height: 5.20 in
- Height [Metric]: 13.2080 cm
- Length: 7.00 in
- Length [Metric]: 17.7800 cm
- Material: Malleable Iron
- Mounting Type: Surface
- Series: EDSC
- Standards: RoHS Compliant, UL 894, 1203, E10523, E81751
- Type: 2-Gang 3-Way Feed-Through
- UNSPSC: 39121565
- UPC 11: 78138145151
- UPC 12: 781381451512
- Width: 6.80 in
- Width [Metric]: 17.2720 cm
- Stock Status: NONSTOCK
- Brand: Appleton™
- Manufacturer: Appleton
- Amperage Rating: 20 A
- NEMA Rating: NEMA 7BCD/9EFG
- Voltage Rating: 120 to 277 VAC
- Features
Enclosures have external mounting lugs for ease of mounting |
Smooth, rounded integral bushing in each hub protects conductor insulation |
Enclosures furnished with internal ground screw |
Factory sealed switches are designed to a UL standard so that any arcing devices are contained within an explosionproof labyrinth switch |
Tumbler switch devices are approved for installation without additional external sealing fittings |
20 A 4-way and all 30 A models utilize a switch enclosed in separate sealing chamber |
Smooth double face, accurately ground surfaces on sealing chamber flange mate with cover and body to provide positive flametight construction |
Sealing chamber has prewired factory sealed pigtail leads to switch |
Threaded stainless steel operating handle provides positive corrosion resistant operation |
Corrosion resistant, strong stainless steel hex head cap screws attach cover or body or sealing chamber assembly for approved flame-tight construction |
Pad lockable in the on or off position |
Designed to prevent arcing of enclosed switches in ignitable atmospheres during connect and disconnect operation of lighting and light power loads |
For use in classified areas where ignitable vapors, gases or highly combustible dusts are present. For installation in chemical plants, petrochemical plants, refineries, other process industries |
(2) 3/4 in feed-thru hub |
2-gang |
1 hp at 120 VAC, 2 hp at 240 VAC |
Zinc electroplated chromate epoxy powder coated malleable iron, nylon 6/6 handle |
Front operated lever actuator |