Appleton® EDSC175F1A Unilet® EDS Feed Through Tumbler Switch Control Station, 120/277 VAC, 20 A, 1 Operator, NEMA 3/7CD/9EFG
Tumbler-Snap Switch Control Stations
941053
MFG #: EDSC175F1A
Appleton™
377.68000
/ ea
- Actuator: Front Operated
- Application: For Use In Classified Areas Where Ignitable Vapors, Gases Or Highly Combustible Dusts Are Present
- ARRA Compliant: N
- Buy American Compliant: N
- Catalog Number: EDSC175F1A
- Country of Origin: MX
- Currency: USD
- Enclosure: NEMA 7CD, 9EFG
- EU RoHS Indicator: N
- Gross Weight Per Pack: 0.0006 lb
- Gross Weight per Pack Metric: 0.99
- Gross Weight UOM Metric: kg
- Height: 6.00 in
- Height [Metric]: 15.2400 cm
- Length: 8.00 in
- Length [Metric]: 20.3200 cm
- Mounting: Surface Mount With 3/4 IN Feed-Thru Hub
- Number Of Poles: 1
- Standard: UL 894, UL 1203, E10523, E81751 UL Listed, Class I, Group B, As Well As Class I, Groups C And D, Class II, Groups E, F, G, And Class III
- Standards: Class I, Division 1, 2, Groups B, C, D, Class II, Division 1, 2, Groups E, F, G, Class III, UL 894/1203, File Number E10523, E81751
- Sub Brand: UNILETS
- Type: EDSC Series 1-Gang Tumbler Switch
- UNSPSC: 39121565
- UPC 11: 78138179587
- UPC 12: 781381795876
- Width: 6.00 in
- Width [Metric]: 15.2400 cm
- Stock Status: NONSTOCK
- Brand: Appleton™
- Manufacturer: Appleton
- Amperage Rating: 20 A
- Voltage Rating: 277 VAC
- http://www.appletonelec.com(Seller Home Page URL)
- https://www.appleton.emerson.com/(Seller Home Page URL)
- Owners Manual URL - Appleton_EDS110_F1_Manual.pdf(Owners Manual URL)
- Spec Sheet URL - eds-switch-appleton.pdf(Spec Sheet URL)
- Warranty 1 URL - WAR_EGS_Terms_Conditions_Brand_Policies.pdf(Warranty 1 URL)
- Warranty URL - 11043_AFRVNTEYP0B9JHS4.pdf(Warranty URL)
- Warranty URL - appleton-grp-terms-and-conditions.pdf(Warranty URL)
- Applications
- Features
| For Use In Classified Areas Where Ignitable Vapors, Gases Or Highly Combustible Dusts Are Present |
| Corrosion resistant, pad lockable in the on or off position; Enclosures have external mounting lugs for ease of mounting; Smooth, rounded integral bushing in each hub protects conductor insulation; Enclosures furnished with internal ground screw; Smooth ground mating surfaces assure flame-tight joint between cover and mounting enclosure; Stainless steel hex head cap screws for attaching cover to mounting enclosure; Each handle has close-tolerance threaded stainless steel shaft to meet explosionproof requirements; Designed to prevent arcing of enclosed switches in ignitable atmospheres during connect and disconnect operation of lighting and light power loads; On/off legend marking |
| Enclosures have external mounting lugs for ease of mounting |
| Smooth, rounded integral bushing in each hub protects conductor insulation |
| Enclosures furnished with internal ground screw |
| Factory sealed switches are designed to a UL Standard so that any arcing devices are contained within an explosionproof labyrinth switch (standard switch and sealing chamber on select models) |
| Tumbler switch devices are approved for installation without additional external sealing fittings |
| 20 Amp 4-way and all 30 Amp models utilize a switch enclosed in separate sealing chamber |
| Smooth double-face, accurately ground surfaces on sealing chamber flange mate with cover and body to provide positive flame-tight construction |
| Sealing chamber has prewired factory sealed pigtail leads to switch |
| Corrosion resistant, strong stainless steel hex head cap screws attach cover/body/sealing chamber assembly for approved flame-tight construction |
| Threaded stainless steel operating handle provides positive Corrosion resistant operation |
| Choice of front-operating or side rocker arm handle-each may be locked in ON or OFF position |
| 1 hp at 120 VAC, 2 hp at 240 VAC |
| Nylon 6/6 Actuator |
| 3/4 in Hub |
| Explosionproof, dust-ignitionproof, hazardous location |