Appleton® N1DC75-102 DIV 1 SELECTOR SWITC
Selector Switch Control Stations
758971
MFG #: N1DC75-102
Appleton™
872.38000
/ ea
- Actuator: Knob
- ARRA Compliant: N
- Buy American Compliant: N
- Catalog Number: N1DC75-102
- Color: Neutral
- Connection Type: 1/2 or 3/4 in Hub
- Contact Rating: 10 A at 600 VAC
- Country of Origin: MX
- Currency: USD
- Dimensions: 4.5 in W x 6.5 in D x 6.19 in H
- EU RoHS Indicator: C
- Gross Weight Per Pack: 3.6000 lb
- Gross Weight per Pack Metric: 1.63
- Gross Weight UOM Metric: kg
- Height: 6.10 in
- Height [Metric]: 15.4940 cm
- Legend: Hand/Off/Auto
- Length: 7.20 in
- Length [Metric]: 18.2880 cm
- Material: Glass Reinforced Thermoplastic Polyetherimide
- Series: N1 Series
- Standards: NEC Class I Division 1 and 2 Group C DRoHS CompliantUL 508/698/1203/E10449/E81751
- Type: 1-Gang 2-Circuit Feed-Through
- UNSPSC: 39121565
- UPC 11: 78138147608
- UPC 12: 781381476089
- Width: 7.20 in
- Width [Metric]: 18.2880 cm
- Stock Status: NONSTOCK
- Brand: Appleton™
- Manufacturer: Appleton
- Contact Configuration: 4NO/2NC
- NEMA Rating: NEMA 3/4X/7CD/12
- Features
| Non-metallic construction with metal imbedded grounding grid |
| No need to install special wires and parts for grounding |
| Feed-through or dead-end grounded 1/2 or 3/4 in conduit openings for threaded conduit |
| Special grounding wire furnished with each box provided |
| Non-metallic enclosures with corrosion resistant parts coated with epoxy, PTFE or Mylar™, these control stations offer unsurpassed resistance to chemicals |
| Silicone gasket, specially designed for the labyrinth-path point between cover and body, prevents entrance of moisture and dust |
| Smooth rounded integral bushing in each conduit opening protects conduct or insulation |
| Accurately tapped, tapered conduit openings for tight, rigid joints and ground continuity |
| Stainless steel pushbutton shaft operates within stainless steel bushing assuring long, maintenance free operation |
| Push button and selector switch contacts are silver cadmium oxide which are "sealed" in lower phenolic chamber isolated from corrosive elements |
| N1 Series is designed with unique Labyrinth-path construction to assure a flame-tight joint between body and cover |
| Explosionproof, with sealing fittings field installed adjacent to enclosure on all conduit runs, the N1 Series enclosures withstood a hydrostatic test |
| N1 Series has typical mechanical properties of 24500 psi tensile strength, 3% elongation at break, 33000 psi flexural strength and 1200000 psi flexural modulus |
| Electrical properties of sample specimens dielectric strength (in air) of 769 at 1/16 in |
| N1 Series is designed with high strength thermoplastic polyetherimide, together with thick walls (5/16 in) and sound structural design (rounded corners) provides superior resistance to impact and crushing |
| Non-factory sealed |
| 3 positions |