Appleton® Intraground® N1 N1DC75UM1 Feed Through Pushbutton Switch Control Station, 600 VAC, 10 A, 1NO/1NC, 1 Operator
Explosion Proof Control Stations
759265
MFG #: N1DC75UM1
Appleton™
895.32000
/ ea
- Actuator: Mushroom Head
- ARRA Compliant: N
- Buy American Compliant: N
- Catalog Number: N1DC75UM1
- Contact Mode: Maintained
- Country of Origin: MX
- Currency: USD
- Dimensions: 6.19 in H x 4.5 in W x 5.94 in D
- EU RoHS Indicator: N
- Finish: Epoxy Powder Coated
- Gross Weight Per Pack: 3.6000 lb
- Gross Weight per Pack Metric: 1.63
- Gross Weight UOM Metric: kg
- Height: 5.70 in
- Height [Metric]: 14.4780 cm
- Legend: EMERGENCY STOP
- Length: 6.70 in
- Length [Metric]: 17.0180 cm
- Material: Thermoplastic Polyetherimide
- Operator Type: Button
- Series: N1
- Standards: Class I Div 1, 2 Groups B C DClass II Div 1, 2 Groups E F GClass IIIUL 698
- Type: Feed-Through
- UNSPSC: 39121565
- UPC 11: 78138170100
- UPC 12: 781381701006
- Width: 7.10 in
- Width [Metric]: 18.0340 cm
- Stock Status: NONSTOCK
- Brand: Appleton™
- Manufacturer: Appleton
- Amperage Rating: 10 A
- Contact Configuration: 1NO-1NC
- NEMA Rating: NEMA 3/3R/4/4X/IP66
- Voltage Rating: 600 VAC
- Features
| Dozens of possible combinations of push buttons, pilot lights and selector switches |
| Smooth, rounded integral bushing in each conduit opening protects conduct or insulation |
| Accurately tapped, tapered conduit openings for tight, rigid joints and ground continuity |
| Stainless steel push button shaft operates within stainless steel bushing, assuring long, maintenance-free operation |
| Push button and selector switch contacts are silver cadmium oxide which are "sealed" in lower phenolic chamber isolated from corrosive elements |
| Assures positive contact and long, trouble-free operation |
| Enclosed stainless steel helper spring prevents accidental operation of push button in severe vibration installations |
| 1 gang |
| 1 circuit |
| Corrosion resistant stainless steel Teflon® coated hex head cap screws hold covers to body |
| Push buttons are supplied with lockout type guards as standard |
| Hole in guard will accept locks with up to 1/4" hasp |
| Permits locking of push button to prevent unauthorized operation |
| Clearly marked terminals with brass screws assure quick, easy wiring |
| Glass Reinforced Thermoplastic Polyetherimide |
| 1 element |
| Factory sealed |
| Thermoplastic polyetherimide |
| Universal, 1/2 or 3/4 in hub |
| Explosionproof, dust-ignitionproof, hazardous location |