Appleton® EFDB110U2 EFDB Dead End Pushbutton Switch Control Station, 600 VAC, 10 A, 1NO/1NC, 2 Operators, NEMA 3/7CD/9EFG
Explosion Proof Control Stations
573433
MFG #: EFDB110U2
Appleton™
513.14000
/ ea
- Action: Momentary
- Application: For Remote Control Of Motors
- ARRA Compliant: N
- Buy American Compliant: N
- Catalog Number: EFDB110U2
- Contact Rating: 10 AMP At 600 VAC
- Country of Origin: MX
- Currency: USD
- Enclosure: NEMA 3, 7CD, 9EFG
- EU RoHS Indicator: N
- Gross Weight Per Pack: 4.8500 lb
- Gross Weight per Pack Metric: 1.98
- Gross Weight UOM Metric: kg
- Height: 6.00 in
- Height [Metric]: 15.2400 cm
- Length: 7.50 in
- Length [Metric]: 19.0500 cm
- Mounting: Surface Mount With 1 IN Dead-End Hub
- Standard: UL 508, UL 698, UL 1203, E10449, E81751 UL Listed, Class I, Division 1, Groups, C, DClass I, Division 2, Groups B, C, D, Class II, Division 1 And 2, Groups E, F, G And Class III
- Standards: Class I, Division 1, 2, Groups B, C, D, Class II, Division 1, 2, Groups E, F, G, Class III, UL 508/698/1203
- Type: EFDB Series 1-Gang 2 Circuit Push Button Switch
- UNSPSC: 39121565
- UPC 11: 78138170119
- UPC 12: 781381701198
- Width: 7.20 in
- Width [Metric]: 18.2880 cm
- Stock Status: NONSTOCK
- Brand: Appleton™
- Manufacturer: Appleton
- Contact Configuration: 1 NO/1 NC
- Applications
- Features
| For Remote Control Of Motors |
| Eliminate need for adding sealing fittings and compound at each conduit entrance; Accurately tapped, tapered hubs for tight, rigid joints and ground continuity; Stainless steel push button shaft operates within stainless steel bushing assuring long, maintenance free operation; Push button switch contacts are silver cadmium oxide which are sealed in lower phenolic chamber isolated from corrosive elements. Assures positive contact and long trouble-free operation; Enclosed stainless steel helper spring prevents accidental operation of push button in severe vibration installations; Push button models also available with dust cap for use in areas where excessive dust, moisture or corrosive conditions are encountered |
| Eliminate need for adding sealing fittings and compound at each conduit entrance |
| Dozens of possible combinations of push buttons, selector switches and pilot lights |
| Smooth, rounded integral bushing in each EFD/EFDB hub protects conductor insulation |
| Accurately tapped, tapered hubs for tight, rigid joints and ground continuity |
| Stainless steel push button shaft operates within stainless steel bushing assuring long, maintenance free operation |
| Push button and selector switch contacts are silver cadmium oxide which are "sealed" in lower phenolic chamber isolated from corrosive elements |
| Assures positive contact and long, trouble-free operation |
| Enclosed stainless steel helper spring prevents accidental operation of push button in severe vibration installations |
| Push button models also available with dust cap for use in areas where excessive dust, moisture or corrosive conditions are encountered |
| Corrosion resistant captive stainless steel hex head cap screws hold EFKB covers to body |
| Factory sealed selector switches furnished with nylon camoperated, heavy-duty push buttons for either 2-position or 3-position maintained contact operation |
| 1 gang |
| 2 circuits, universal |
| Triple-coat-(1) zinc electroplate, (2) chromate, and (3) epoxy powder coat |
| 1 in Hub |
| Explosionproof, dust-ignitionproof, hazardous location |