RadioRA® RR-MAIN-REP-WH Main Repeater, RS485 Port
Network Repeaters
564778
MFG #: RR-MAIN-REP-WH
Lutron®
550.00000
/ ea
- ARRA Compliant: N
- Buy American Compliant: N
- Catalog Number: RR-MAIN-REP-WH
- Country of Origin: US
- Currency: USD
- Dimensions: 5-1/4 in H x 4-1/4 in W x 1-1/6 in D
- Enclosure: Plastic
- Environmental Conditions: 0 to 90% Non-Condensing Humidity
- EU RoHS Indicator: N
- Frequency Rating: 434 MHz
- Functions: Remote Link
- Gross Volume Per Pack: 0.09
- Gross Volume per Pack Metric: 0.00
- Gross Weight Per Pack: 1.2400 lb
- Gross Weight per Pack Metric: 0.45
- Gross Weight UOM Metric: kg
- Height: 2.50 in
- Height [Metric]: 6.3500 cm
- Indication: LED
- Input: 9 VDC/300 mA
- Length: 9.25 in
- Length [Metric]: 23.4950 cm
- Material: Plastic
- Mounting: Ceiling/Surface
- Mounting Type: Ceiling/Surface
- Power Supply: 300 mA at 120 VAC
- Standard: cUL, FCC, ICC, COFETEL, ASEP, Bermuda Department of Telecommunications, CRC, INDOTEL, SUTEL
- Standards: ASEP/COFETEL/CRC and FCC Certified, cULus Listed, INDOTEL Certified and SUTEL Certified
- Sub Brand: RadioRA 2
- Temperature Rating: 32 to 104 °F
- Type: Repeater, main
- UNSPSC: 32151703
- UPC 11: 02755777465
- UPC 12: 027557774659
- Voltage Rating: 9 VDC/300 mA
- Width: 6.75 in
- Width [Metric]: 17.1450 cm
- Stock Status: NONSTOCK
- Brand: Lutron®
- Manufacturer: Lutron Electronics Co., Inc
- Port Type: RS485
- Brochure URL - 10977_6DXI1SKOG72JEWTA.pdf(Brochure URL)
- http://www.lutron.com(Seller Home Page URL)
- Install Instructions 1 URL - 10977_CP1QG7YDBVWLOZN9.pdf(Install Instructions 1 URL)
- Install Instructions URL - 044-159c.pdf(Install Instructions URL)
- Spec Sheet URL - 10977_X7SW3AM56QENRVH0.pdf(Spec Sheet URL)
- Warranty URL - 10977_VHQEXPMKS6A5LTFR.pdf(Warranty URL)
- Features
| Extend the range of Radio Frequency (RF) signals that are sent between devices. Ensure error-free communication between system components and prevent interference from neighboring systems. Repeater has an RF range of 30 ft (9 m). |
| For systems that extend up to 30 ft (9 m), one (1) main repeater is required to set up the system |
| Up to four (4) auxiliary repeaters can be added to extend the RF range for larger system applications |
| Each repeater has an RF range of 30 ft, covering a total area of approximately 2500 sq ft |
| One LED on, Ethernet cable plugged in, powered by the 9 V adapter test condition |
| Power failure memory should power be interrupted, the repeater will return to its previous state when power is restored |
| Tested to withstand electrostatic discharge without damage or memory loss |
| Tested to withstand surge voltages without damage or loss of operation |
| Mount on a wall, ceiling, or level surface using the two M3 screws provided |