Wiremold® Plugmold® V20GB306 2000 1-Channel Multi-Outlet Power Strip, 125 VAC, 15 A, 6 Outlets, Threaded Mount
Prewired Raceways
37835
MFG #: V20GB306
Wiremold®
58.42000
/ ea
- ARRA Compliant: Y
- Back Type: Screw-On
- Buy American Compliant: Y
- Catalog Number: V20GB306
- Color: Ivory
- Country of Origin: US
- Currency: USD
- Environmental Conditions: Dry interior locations
- EU RoHS Indicator: Y
- Gross Volume Per Pack: 50.85
- Gross Volume per Pack Metric: 833.28
- Gross Volume UOM: CI
- Gross Volume UOM Metric: cm3
- Gross Weight Per Pack: 1.9500 lb
- Gross Weight per Pack Metric: 0.86
- Gross Weight UOM Metric: kg
- Harmonization Tariff Schedule Code: 8536698000
- Height [Metric]: 2.8702 cm
- Length [Metric]: 91.4400 cm
- Material Composition: http://www.ideadigitalcontent.com/files/11311/ROH_Legrand_ROHS_statement.pdf
- Material Composition Declaration: http://www.ideadigitalcontent.com/files/11311/ROH_Legrand_ROHS_statement.pdf
- Mounting Type: Threaded
- Number of Outlets: 6
- Outlet Type: NEMA 5-15R
- Series: 2000
- Standard: NAFTA, CULUS, ROHS, cULus Listed Multioutlet Assembly: File E15191 Guide PVGT/PVGT7
- Standards: ARRA CompliantBuy American Act CompliantRoHS CompliantcULus E4376 Guide RJBTE41751 Guide RJPRMeets Article 386 of NECMeets Section 12-1600 of CEC
- Type: 1-Circuit
- UNSPSC: 39121031
- UPC 11: 78677609316
- UPC 12: 78677609316
- Voltage Rating: 125 VAC
- Width [Metric]: 3.1750 cm
- Stock Status: NORMALLY STOCKED
- Brand: Wiremold®
- Manufacturer: Legrand
- Height: 1.13 in
- Length: 36.00 in
- Material: Steel
- Number of Channels: 1
- Width: 1.25 in
Plugmold sections come with single or alternating circuits, standard or isolated ground receptacles, and Snapicoil harnesses of prewired receptacles or cord ended units. Steel Plugmold comes in an ivory ScuffCoat or gray enamel finish. The ScuffCoat finish is scratch resistant and protects against nicks and chips while preventing color from fading.
- Brochure URL - 533534A6523D48FCA163BB2881EE0C61.pdf(Brochure URL)
- Catalog URL - IDW_DOCUMENT_9c63a391b4d8d55f2b3b44494d5a924906821a768cbd67854cce6f17a11ff250.pdf(Catalog URL)
- http://www.wiremold.com(Seller Home Page URL)
- ROHS Compliance URL(ROHS Compliance URL)
- Material Composition - ROH_Legrand_ROHS_statement.pdf(Material Composition)
- Install Instructions 1 URL - 533534A6523D48FCA163BB2881EE0C61.pdf(Install Instructions 1 URL)
- Warranty URL - 11311_IFWKSCQE730BZ2V5.pdf(Warranty URL)
- Spec Sheet URL - 11311_7Z3Y69RFHXM4DJNS.png(Spec Sheet URL)
- Features
| Steel Raceway, Compact low profile design, Full range of fittings, one and two - gang device boxes. |
| Steel raceway provides superior strength for any dry location installation |
| Compact, low profile appearance requires minimal space |
| The durable ivory ScuffCoat provides a durable, scratch-resistant finish |
| Full range of fittings provides a complete wiring solution |
| Single-and-dual-gang boxes wire devices into the raceway system or protect a Plugmold® strip with a surge or GFCI device |
| Ideal for short runs requiring additional outlets in electrically busy areas |
| Single, alternating circuit, and isolated ground receptacles meets virtually any job requirement |
| Snapicoil harnesses of prewired receptacles in 48 and 50 ft, eliminates multiple splicing, speeding up installation on long runs |
| Snapicoil harnesses offer a choice of receptacle spacing |
| Dry interior locations |
| GB wiring configuration |
| 6 in outlet center distance |
| 3-wire, #12 THHN (1 hot, 1 neutral and 1 ground), 1 circuit; has insulated grounding conductor |