CALBOND PV0700ST2 ST2 3/4 KNOCKOUT HUB - PVC COATED"
Conduit Hubs
808014
MFG #: PV0700ST2
Calbond
76.74000
/ ea
- Application: USED TO TERMINATE CONDUIT RUNS INTO ELECTRICAL ENCLOSURES
- ARRA Compliant: N
- Buy American Compliant: N
- Catalog Number: PV0700ST2
- Color: Black
- Connection: Threaded
- Country of Origin: IN
- Currency: USD
- Dimensions: 2.25 in Dia x 0.125 in THK Wall x 2.22 in H
- EU RoHS Indicator: X
- Gross Weight Per Pack: 0.2500 lb
- Gross Weight per Pack Metric: 0.14
- Gross Weight UOM Metric: kg
- Height: 2.25 in
- Height [Metric]: 5.7150 cm
- Length: 2.22 in
- Length [Metric]: 5.6388 cm
- Series: ST Series
- Standard: UL 514B/NEC.CEC CLASS1 DIV2,CLASS2 DIV1 & 2/CLASS 3 DIV1 & 2 CLASS 1 ZONE 1 AEX E II CLASS 1 ZONE 1 EX E LL.ALL CREW TIGHT HUBS ARE NEMA TYPE 2,3,3R 4, 4X,11,12
- Standards: ARRA CompliantRoHS CompliantUL 514BClass I Div 2 Class II Div 1 and 2 Class III Div 1 and 2 Class I Zone 1 AEx e II, Class 1 Zone 1 Ex e II NEC/CEC, All Screwtight Hubs are Listed for NEMA 2/3/3R/4/4X/11/12
- Temperature Rating: 200
- Trade Size: 0.75 in
- Type: PVC COATED CONDUIT HUBS
- UNSPSC: 39121311
- UPC 11: 84765607214
- UPC 12: 847656072148
- Width: 2.25 in
- Width [Metric]: 5.7150 cm
- Stock Status: NORMALLY STOCKED
- Brand: Calbond
- Manufacturer: Calpipe Industries
- Finish: PVC Coated
- Material: PVC
- Size: 3/4 in
- Suitable For Use With: Rigid Conduits
PVC Coated Galvanized Rigid KNOCKOUT HUB 3/4" Trade Size
- Catalog URL - Calbond_PA0500C17SA_Catalog.pdf(Catalog URL)
- http://calpipe.com/(Seller Home Page URL)
- Spec Sheet URL - 14264_M64750AQBJFEDKS1.pdf(Spec Sheet URL)
- http://www.calpipe.com/(Seller Home Page URL)
- Spec Sheet URL - 11486_D1XNRCSJ9U2OZ6F4.pdf(Spec Sheet URL)
- Spec Sheet 1 URL - Calbond_PA0500STA1_Datasheet_1.pdf(Spec Sheet 1 URL)
- Spec Sheet URL - ST_Conduit%20Hub_Cut%20Sheet.pdf(Spec Sheet URL)
- Spec Sheet URL - ID-SPE-v1-ST_Conduit_Hub_Cut_Sheet.pdf(Spec Sheet URL)
- Warranty URL - Terms(Warranty URL)
- Applications
- Features
| USED TO TERMINATE CONDUIT RUNS INTO ELECTRICAL ENCLOSURES |
| Exterior PVC coating thickness is a minimum 0.04 in |
| Interior urethane coating thickness is a minimum 0.002 in |
| Sealing sleeves on conduit side of hub |
| Molded PVC gasket seals flush with enclosure wall |
| Neoprene O-ring gasket provides additional seal |
| The length of the sleeve extension's shall be at least equivalent to the nominal conduit size for sizes 1/2 to 2 in |
| For sizes 2-1/2 to 6 in the length of the sleeve extension's shall be at least 2 in |