- Alternate Catalog Number: 7TAH007720R0018
- ARRA Compliant: C
- Buy American Compliant: C
- Catalog Number: MDBOOT-SEAL
- Container: Roll
- Country of Origin: US
- Currency: USD
- EU RoHS Indicator: C
- Gross Volume Per Pack: 0.02
- Gross Volume per Pack Metric: 0.00
- Gross Weight Per Pack: 0.7100 lb
- Gross Weight per Pack Metric: 0.32
- Gross Weight UOM Metric: kg
- Harmonization Tariff Schedule Code: 4016935050
- Height: 0.50 in
- Height [Metric]: 1.2700 cm
- Item Group: 1M
- Item Group 2: 1MI
- Length: 10.00 in
- Length [Metric]: 25.4000 cm
- Material: Polybutene Compound
- Returnable: C
- Size: 10-Foot
- Standards: ARRA CompliantBuy American Act CompliantRoHS Compliant
- Sub Brand: Color-Keyed®
- Temperature Range: 40 to 180 F
- Type: Motor Disconnect Boot Sealant
- UNSPSC: 39121337
- UPC 11: 78621071367
- UPC 12: 786210713670
- Width: 8.00 in
- Width [Metric]: 20.3200 cm
- Stock Status: NONSTOCK
- Brand: T&B® (Thomas & Betts)
- Manufacturer: Thomas & Betts
Color-Keyed® KUBE Sealant, 10 ft Length, 1 in Width, 1/8 in Thickness, Polybutene, 200 VAC/mil Dielectric, -40 to 180 deg F
- Catalog URL - Color_Keyed_MDBOOT_SEAL_Brochure.pdf(Catalog URL)
- http://www.TNB.com(Seller Home Page URL)
- Line Drawing URL - sealant_ck1ld_0(Line Drawing URL)
- Install Instructions 1 URL - TA00899-TB2.pdf(Install Instructions 1 URL)
- Safety Data Sheet URL - SDS-00046-TB2.pdf(Safety Data Sheet URL)
- Safety Data Sheet URL - SDS-00044-TB2.pdf(Safety Data Sheet URL)
- Spec Sheet URL - 12055_U1BA7L5NP8M6TE4R.pdf(Spec Sheet URL)
- Spec Sheet URL - 007_CAT3_F53-61.pdf(Spec Sheet URL)
- Tech Drawing URL - mdbootseal_ck1.JPG(Tech Drawing URL)
- Applications
- Features
| The cable should be clean and free of grease and other foreign substances. Apply two layers around each cable at the same distance from the connector. Slide the assembly into boot, apply Ty-Rap cable ties and work sealant around wires at end of boot to eliminate voids. |
| Resists acids, bases and alcohols. |
| Resists acids, bases and alcohols |
| Passes VO vertical flame test |
| The cable should be clean and free of grease and other foreign substances |
| Apply 2-layers around each cable at the same distance from the connector |
| Slide the assembly into boot, apply Ty-Rap® cable ties and work sealant around wires at end of boot to eliminate voids |
| Roll container |
| Sealant should be used with t and b motor disconnect boots MDBOOT-O, MDBOOT-1, MDBOOT-2 and MDBOOT-3 |