Sandvik Coromant 6532481 T-Max® P Negative Basic Shape Turning Insert, SNMM 546-QR 4325, S-Square, SNMM Insert, 4325
SNMM Turning Inserts
1239072
MFG #: 6532481
Sandvik Coromant
26.33000
/ ea
- Alternate Catalog Number: SNMM 546-QR 4325
- ANSI Code: SNMM 546-QR 4325
- Catalog Number: 6532481
- Corner Radius: 0.094 in
- Country of Origin: SE
- Finish: CVD-TiCN+Al2O3+TiN Coated
- Gross Weight Per Pack: 0.4500 lb
- Hole Diameter: 1/4 in
- Included Angle: 90 °
- ISO Code: SNMM 15 06 24-QR 4325
- Item Group: 112
- Length: 5/8 in
- Relief Angle: 0 °
- Series: T-Max® P
- Thickness: 1/4 in
- Width: 5/8 in
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Chipbreaker: QR
- Cutting Direction: Neutral
- For Use On: Cast Iron and Steel
- Inscribed Circle: 5/8 in
- Insert Size: 546
- Insert Style: SNMM
- Manufacturer's Grade: 4325
- Material: Carbide
- Material Grade: K, P
- Maximum Depth of Cut: 0.421 in
- Rake: Negative
- Seat Size: 15
- Shape: Square
- Features
| T9325 grade functionally gradient substrate |
| Relatively low content of cobalt binder phase |
| Thick MT-CVD coating |
| Highly versatile material with very good operational reliability |
| Special surface finish for coating |
| Medium and higher cutting speed |
| Continuous and interrupted cut |
| Unfavorable cutting conditions, continuous and/or interrupted cuts |
| Cutting geometry suitable for grooving and axial turning |
| For fine turning and finishing |
| M chipbreaker - positive geometry |
| Low cutting forces, appropriate chip formation |
| For milling of cast iron and steel |