nLight® NPODM-4P-DX-WH NPODM Network Wall Pod, <5 mA, 4 Poles, White
Wall Switch Stations
934326
MFG #: NPODM4PDXWH
nLight®
91.29000
/ ea
- Catalog Number: NPODM4PDXWH
- Control: Pushbutton
- Country of Origin: MX
- Dimensions: 2.74 in H x 1.68 in W x 1.63 in D
- Finish: Gloss
- Gross Weight Per Pack: 0.3000 lb
- Mounting Type: Wall
- Series: NPODM
- Standards: UL Listed
- Temperature Rating: 0 to 60 °C
- Type: 4-Channel
- UNSPSC: 39121107
- UPC 11: 78423138660
- UPC 12: 78423138660
- Stock Status: NONSTOCK
- Brand: nLight®
- Manufacturer: Acuity Brands
- Amperage Rating: <5 mA
- Color: White
- Operation Mode: ON/OFF + Raise/Lower
The nPODM xS Series WallPods are single gang nLight-enabled devices that provide one, two, and four scene control. These units provide a convenient method of selecting a custom lighting control scene for the room in which it is installed, or requesting a global profile scene be run across several remote zones. By default, however, the buttons of an nPODM xS are configured as on/off toggle switches. Scenes are programmed to these units utilizing available SensorView software. The nPODM xS has soft-click push-buttons with a green LED indicator for each button. These button are field replaceable and can be custom engraved. Two RJ-45 connectors allow the nPODM xS to be daisy-chain wired with CAT-5e cabling to other nLight network devices. The nPODM xSB offers individual on/off buttons for each scene. Pressing the "on" button will reset the expiration time of a scene back to the original programmed time. In order to utilize a blink warning, system gateway and additional programming is required. nPODM xSB WallPods are not recommended for use with "preset" style scenes.
- Features
The nPODM xS Series WallPods are single gang nLight-enabled devices that provide one, two, and four scene control. These units provide a convenient method of selecting a custom lighting control scene for the room in which it is installed, or requesting a profile be run across several remote zones. By default, however, the buttons of an nPODM xS are configured as on/off toggle switches.The nPODM xS has soft-click push-buttons and has a green LED indicator for each button. These button are field replaceable and can be custom engraved. Two RJ-45 connectors allow the nPODM xS to be daisy-chain wired with CAT-5 cabling to other nLight network devices. |
On/off + raise/lower control dimming |
Communicates with nLight® network |
Programmable to initiate occ. sensor time delay sweep |
Dynamic options for custom button names when pairing with Acuity brands nTUNE fixtures |
Push button actuator |