Maestro® Wireless® MRF2-6ANS-WH Multi-Location Digital Switch With RF Receiver, 120 VAC, 6/3 A, 1 Pole, White
Lighting Control Switches
1301725
MFG #: MRF2-6ANS-WH
Lutron®
67.34000
/ ea
- Ballast Factor: Plastic/Metal
- Catalog Number: MRF2-6ANS-WH
- Country of Origin: MX
- Dimensions: 4-11/16 in H x 2-15/16 in W x 5/16 in D
- Enclosure Type: Maestro Wireless
- Finish: Gloss
- Frequency Rating: 60 Hz
- Gross Weight Per Pack: 0.2500 lb
- Insulation: UL, cUL, NOM
- Lamp Type: Incandescent/Halogen
- Mounting Type: Surface
- Power Rating: 1 hp/10 hp
- Series: 6/3 A
- Standards: UL Listed, cUL Listed, NOM Certified, FCC Approved, Industry Canada Certified
- Start Type: 1
- Sub Brand: Maestro® Wireless®
- Temperature Rating: 0 to 40 °C
- Type: Multi-Location
- UNSPSC: 39122216
- UPC 11: 02755763717
- Stock Status: NONSTOCK
- Brand: Lutron®
- Manufacturer: Lutron Electronics Co., Inc
- Amperage Rating: 6/3 A
- Color: White
- Operation Mode: 4.69 in (119 mm) x 2.94 in (75 mm)
- Voltage Rating: 120 VAC
- Number Of Poles: 1
- Features
Rated for 6 A incandescent/halogen, magnetic low-voltage, electronic low-voltage, LED/CFL, or fluorescent loads, or 3 A (1/10 HP) general purpose fans and motor loads. Tap switch on/off. For multi-location switching, use one Maestro Wireless switch with companion switches or Pico wireless remotes. |
The Maestro Wireless solution provides dimming/ switching of multiple load types, occupancy/VACancy sensing, daylight harvesting, and high-end trim |
Lutron patented Clear Connect RF Technology works through walls and floors |
Incorporates advanced features such as fade on/ fade off, high-end trim, and rapid full on |
Controls include Front Accessible Service Switch (FASSTM) for safe lamp replacement |
Two-wire dimmers and switches available for retrofit applications |
Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption |
Relative humidity less than 90 percent non-condensing, Indoor use only Environmental Conditions |
6 A Lighting/3 A Fan amperage rating |
Requires neutral wire connection |
1/10 hp at 3 A power rating |
Wall box mounting |