Banner Engineering STBVP6 STB Self-Checking Optical Touch Button With Field Cover, 10 to 30 VDC, 20 ms Response Time
Optical Touch Buttons/Data Couplers
145855
MFG #: STBVP6
BANNER®
168.29000
/ ea
- Catalog Number: STBVP6
- Color: Black
- Connection Type: Cable
- Country of Origin: USA
- Enclosure Type: NEMA 1/3/4/4X/12/13/IP66
- Environmental Conditions: 90% at 55 deg C Non-Condensing Maximum Relative Humidity
- Gross Weight Per Pack: 0.6550 lb
- Indicator LEDs: (2) Green
- Mounting Type: Threaded
- Operating Action: Momentary
- Operating Temperature: 0 to 50 °C
- Output Type: Complementary PNP
- Series: STB
- Size: 2.36 in L x 1.7 in W
- Standards: CE Marked, CSA Certified, UL Listed
- Type: Self-Checking
- UNSPSC: 39121528
- UPC 11: 66248864179
- UPC 12: 66248864179
- Stock Status: NORMALLY STOCKED
- Brand: BANNER®
- Manufacturer: Banner Engineering Corp.
- Material: Polyetherimide
- Response Time: 20 ms
- Voltage Rating: 10 to 30 VDC
- Features
| Diverse-redundant microcontroller-based photoelectric touch buttons; Continuous internal self-checking operation; Ergonomically designed to eliminate hand, wrist and arm stresses associated with repeated switch operation, require no physical pressure to operate; Immune to ambient light, EMI and RFI interference; High excess gain cuts through heavy contamination; LED power, output and fault indicators; Outputs activate while a finger is in the touch area (yoke) of the switch, interrupting the button's infrared sensing beam; When the STBVP6 is used with Banner's SC22-3 Safety Controller in a two-hand control system, the power supply to the STBVP6 must be of the same voltage that is used to power the Safety controller and they must have a common supply ground; Protected against transient voltages, reverse polarity and against false pulse on power-up, model" |
| Continuous internal self-checking operation |
| Diverse-redundant microcontroller-based photoelectric touch buttons |
| Ergonomically designed to eliminate hand, wrist and arm stresses associated with repeated switch operation; require no physical pressure to operate |
| High excess gain cuts through heavy contamination |
| Immune to ambient light, EMI and RFI interference |
| LED power, output and fault indicators |
| Protected against reverse polarity and transient voltages |
| Protected against false pulse on power-up |
| Electronics fully epoxy-encapsulated fiber reinforced polyester base |
| Power On-power applied/output/fault On-button is activated, Off-button is deactivated, flashing-internal fault or blocked button on power-up detected |
| Up to 100000 lux ambient light immunity |
| 150 mA maximum load output rating |
| 1.5 VAC no full load on-state maximum output voltage/less than 1 uA off-state leakage current |
| PVC jacketed 4-wire 2 m integral cable |