Banner Engineering D12SP6FPQ D12 High Speed Fiber Optic Sensor, Rectangle Shape, Visible Red Sensing Beam, 0.5 ms Response Time

Fiber Optic Block Style Sensors
137993 MFG #: D12SP6FPQ
BANNER®
246.25000 / ea
Banner_D12SP6FPQ
  • Amperage Rating: 45 mA
  • Catalog Number: D12SP6FPQ
  • Connection Type: Pigtail Quick-Disconnect
  • Country of Origin: USA
  • Enclosure Type: NEMA 2/IP11
  • Environmental Conditions: 90% at 50 deg C
  • Gross Weight Per Pack: 0.0250 lb
  • Light Source: LED
  • Mounting Type: DIN Rail
  • Operating Temperature: -20 to 70 °C
  • Series: D12
  • Size: 64 mm L x 12 mm W x 35.5 mm H
  • Standards: CE Marked, cULus Listed , RoHS Complaint
  • Type: High Speed
  • UNSPSC: 39121528
  • UPC 11: 66248833713
  • UPC 12: 66248833713
  • Voltage Rating: 10 to 30 VDC
  • Stock Status: NORMALLY STOCKED
  • Brand: BANNER®
  • Manufacturer: Banner Engineering Corp.
  • Output Type: PNP
  • Response Time: 0.5 ms
  • Sensing Beam: Red Laser
  • Shape: Rectangular
QTY
Add to Wishlist
  • Features
LED indicators for power On and N.O Output Conducting; Protected against reverse polarity and inductive load transients; Black (Cycolac® KJB) construction with acrylic cover
35 mm DIN rail high power fiber optic sensors
Less than 10 uA at 30 VDC off-state leakage current
0.5 ms on/off response time
680 nm visible red LED sensing beam
Acrylic lens cover, 90 deg at 50 deg C (non-condensing) relative humidity
6 in pigtail with 4-pin pico-style quick disconnect connection
0.13 ms repeatability
Less than 1 V at 10 mA DC and less than 1.5 V at 150 mA DC on-state saturation voltage
150 mA maximum (continuous) load
Light/dark operate, complementary PNP control output
Black ABS (Cycolac KJB) housing
False pulse protection circuit causes a 0.1 sec delay on power-up
Plastic fiber
15-turn slotted brass screw, clutched at both ends of adjustment
Two top-mounted LED indicators, green LED lights for DC power On, yellow LED lights for normally open output conducting, seven segment red LED moving-dot bargraph indicates received signal strength, output overload, and marginal excess gain, flashing led corresponds to the "on" state of the alarm
Protected against reverse polarity and inductive load transients