TRIPPLITE B150-1A1-HDMI Tripp Lite Display Port to HDMI Over Cat5/6 Extender Transmittor & Receiver
Other Audio-Video Extenders
1078546
MFG #: B150-1A1-HDMI
Tripp Lite
110.65000
/ ea
- Catalog Number: B150-1A1-HDMI
- Color: Black
- Country of Origin: UKN
- Currency: USD
- EU RoHS Indicator: Y
- Gross Weight Per Pack: 0.6000 lb
- Gross Weight per Pack Metric: 0.27
- Gross Weight UOM Metric: kg
- Height: 1.60 in
- Height [Metric]: 4.0640 cm
- Humidity: 10 to 90%
- Length: 7.90 in
- Length [Metric]: 20.0660 cm
- Resolution: 1080
- Series: B150
- Standard: Tested to CE, FCC, REACH, RoHS
- Sub Brand: TRIPP LITE
- Temperature Rating: 0 to 50
- UNSPSC: 52161521
- UPC 11: 03733219011
- UPC 12: 03733219011
- Width: 5.50 in
- Width [Metric]: 13.9700 cm
- Stock Status: NONSTOCK
- Brand: Tripp Lite
- Manufacturer: Tripp Lite
- Connection Type: Side A: Male DisplayPort/Female RJ45/Male USB A, Side B: Male HDMI/Female RJ45/Male USB A
- Distance: 150
- Number of Ports: 1
- Port Speed: 60
- http://www.tripplite.com(Seller Home Page URL)
- Owners Manual URL - 12296_NESLVWCD15RUK49P.pdf(Owners Manual URL)
- Owners Manual URL - 12296_T3O5DIRFHUMCZB27.pdf(Owners Manual URL)
- Owners Manual URL - 781964(Owners Manual URL)
- Spec Sheet URL - 12296_ZJ4CY9OQBUAMFI01.pdf(Spec Sheet URL)
- Spec Sheet URL - b1501a1hdmi.pdf(Spec Sheet URL)
- Features
| The B150-1A1-HDMI DisplayPort to HDMI over Cat5/Cat6 Active Extender Kit includes a transmitter unit and a receiver unit that work in tandem to convert a DisplayPort audio/video signal to HDMI and then extend it to a projector, monitor or television up to 150-ft. (45.72 m) away. The kit is ideal for digital signs, trade shows, presentations, classrooms, churches, retail settings and other applications where the video source is located farther than convention cables allow. One Cat5e/6 cable connects the transmitter and receiver (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series). A built-in DisplayPort cable connects the transmitter to the source, while a built-in HDMI cable connects the receiver to the display. The built-in HDMI cable features a latching connector that helps prevent accidental disconnection. Included USB Micro-B cables connect the transmitter to a USB port on the DisplayPort computer or a USB wall charger (such as Tripp Lite's U280-002-W12), and connect the receiver to a USB port on the HDMI display or a USB wall charger. No external power supplies are needed. The B150-1A1-HDMI can extend a high-definition 1080i (60 Hz) signal up to 150-ft. (45.72 m) and a 1080p (60 Hz) signal up to 125-ft. (38.1 m). In addition to crystal-clear video, including 24-bit True Color (8 bits per channel), the kit delivers full, rich stereo. Green and orange LEDs on both units indicate when they are receiving power from the USB Micro-B cables and sharing a signal. Easy to set up with no software or drivers to install. Works with all operating systems. |