SolaHD DT651H75S Ventilated Drive Isolation Transformer, 460 VAC Delta Primary, 460Y/266 VAC Secondary, 75 kVA, 60 Hz
Drive Isolation Transformers
209083
MFG #: DT651H75S
SolaHD™
3601.43000
/ ea
- Application: SCR Variable Speed Drives
- ARRA Compliant: Y
- Buy American Compliant: Y
- Catalog Number: DT651H75S
- Country of Origin: US
- Currency: USD
- Dimensions: 16 in L x 23 in W x 28 in H
- Enclosure: Nema 3R with weather shield
- Enclosure Type: NEMA 3R
- EU RoHS Indicator: Y
- Gross Weight Per Pack: 536.0000 lb
- Gross Weight per Pack Metric: 243.13
- Gross Weight UOM Metric: kg
- Height: 34.00 in
- Height [Metric]: 86.3600 cm
- KVA Rating: 51
- Length: 22.50 in
- Length [Metric]: 57.1500 cm
- Mounting Type: Floor
- NEMA Frame Size: NEMA 3R
- Number Of Phases: 3
- Standard: cULus Listed: E77014, UL 506, CSA C22.2 No. 66, Listed E25872, UL 1561
- Standards: ARRA CompliantBuy American Act CompliantRoHS CompliantcULus File No. E77014UL 506 File No. E25872UL 1561 File No. E25872CSA C22.2 No. 66
- Type: Ventilated
- UNSPSC: 39121029
- UPC 11: 78347240121
- UPC 12: 783472401215
- Width: 28.00 in
- Width [Metric]: 71.1200 cm
- Stock Status: NONSTOCK
- Brand: SolaHD™
- Manufacturer: Emerson
- Frequency Rating: 60 Hz
- Phase: 3 pH
- Power Rating: 75 kVA
- Primary Voltage: 460 Delta VAC
- Secondary Voltage: 460Y/266 VAC
SolaHD Drive Isolation Transformer, Ventilated, 460 VAC Delta Primary, 460Y/266 VAC Secondary, 75 kVA, 60 Hz, 3 Phase, 1, 5% FCAN/1, 5% FCBN Taps, Floor Mount, NEMA 3R, 34 in H x 28 in W x 22 in D
- Applications
- Features
SCR Variable Speed Drives |
Isolation minimizes load disturbances caused by the SCR drive. Taps on all units for adjustments to incoming source voltage. Full capacity secondary neutral as required by the NEC. |
Taps on all units for adjustments to incoming source voltage |
Full capacity secondary neutral as required by the national electric code |
Shielding attenuates line to ground noise |
Isolation minimizes load disturbances caused by the SCR drive |
A transformer is needed to magnetically isolate the incoming line from the motor drive |
The transformer must also provide a voltage change to match the required voltage of the SCR drive |
Standard designs are delta primary and wye secondary to match the common power sources required in most 3-phase rectifier circuits |
Designed to handle the mechanical stresses, voltage demands and harmonics associated with SCR applications |
Designed to handle the mechanical stresses, voltage demands and harmonics associated with SCR applications |